Best Welding Gloves for Stick & MIG 2020 – Reviews & Guide

best welding gloves 2020

In this post, I shall be reviewing the 9 best welding gloves 2020 which can protect you during MIG & Stick welding. Welding is a perilous job, and you are in the vicinity of much heat. The temperature can go up to thousands of centigrade and can cause serious skin damage unless you get yourself covered.

Covering your hand is essential; otherwise, the fumes and arc can cause serious tissue damage, and you might get blisters all over your hands. This mistake can cause you much trouble, and this itching will haunt you, and you might be unable to use your hands for a very long time.

This post will help you in choosing the appropriate gloves for MIG & Stick operations. I have categorized the top 9 gloves based on their insulation, heat resistant properties, thickness, and material kind and, finally, come up with the following picks.

Best Stick, MIG Welding Gloves Top Picks 2020

Brand
Material Kind
Ratings
Check Price
RAPICCA
Leather MIG
Welding
Gloves
RAPICCA Leather Forge MIG Welding Gloves:
Cowhide Leather & Kevlar Fiber
⭐⭐⭐⭐⭐
Caiman 21"
Deerskin
Caiman 21" Deerskin Welders Gloves
Deer Skin & Boarhide
with Kevlar stitching
⭐⭐⭐⭐⭐
KIM YUAN
Extreme Heat
Resistant Gloves
KIM YUAN Extreme Heat Resistant Gloves
Cow Leather &
Kevlar Stitching
⭐⭐⭐⭐⭐
Revco GM1611
Top Grain
Revco GM1611 Top Grain MIG Welding Gloves 
Grain Cowhide Leather
⭐⭐⭐⭐⭐
US Forge
400

US Forge 400 Welding Gloves
Quality Leather
⭐⭐⭐⭐
John Tillman
John Tillman and Co 50L Gloves
Cowhide and Kevlar
⭐⭐⭐⭐

9 Best Welding Gloves for MIG & Stick

1.RAPICCA Leather Forge Gloves

RAPICCA Leather MIG Welding Gloves

Okay, I am starting with the Rapicca Leather welding gloves; they are built of cowhide leather with Kevlar patches. The palm, fingers, and contact points are double padded with kevlar fiber, which protects against thermal shocks.

The material used is perfectly heat resistant and can sustain up to 932 °F with no chance of getting allergies or skin burns. The best thing about these pairs is its careful stitching that is done by fire retardant thread, and the worst is sometimes it comes off. This alone considerably enhances productivity and gives the edge on handling welding parts.

The cotton plug inside the thumbs provides you great comfort. The long sleeves are a bit short, but still, they let you play safely with your sparks. The inside arrangements of gloves make them absorbing the sweat and allows you a better hold of your welding part. This significantly increases the quality of weld joints.

The 1.5 mm thick cowhide leather makes these gloves cut-resistant and minimize the chances of sharp objects piercing through your hands. If you are holding the part firmly then there is a greater chance you will get fine and stronger welds and for that reason, they are best nullifying the chances of hand sweat.

Pros
  • 16 inches long
  • Withstand 932 Fahrenheit
  • Double padded Kevlar
  • Internal Linning with Cotton
  • Heat Resistant and cut resistant
  • Easy to wear and not allergetic
  • Can be used for stove and other applications
Cons
  • Sometimes Stiching wears off
  • Gets dirty easily

 

2.Caiman 21″ Deerskin Gloves

Caiman 21" Deerskin

The Caiman 21″ are my personal favorite and they have never let me down. From heavy welding to long hours they have protected me well. Its a combination of American deerskin and boarhide which promises exceptional heat resistant properties and ambiance.

The 21″ long sleeve covers your elbows and the insulation pads keep the heat out allowing you a steady focus over your weld. The Kevlar stitching can withstand the hot work. If you work long hours, then sometimes your hands get sweaty due to extreme heat but this can be dealt with taking little breaks.

Its design is pretty cool and they are highly flexible with tough positions and dexterity allowing you the complete control over the gun. I have found them durable and trustworthy but if your weld produce too much spatters then you might notice a few holes but still, it can withstand heat pretty well. Have a look at: Best MIG Welders 2020

From its design to its body material I would recommend them highly plus you will hear about them a lot!

Pros
  • 21 inches long
  • Deer Skin and borehide covering
  • Kevlar Stiching
  • Elegant Design
  • Durable
  • Internal Linning with Cotton
  • Can be used for stove and other applications
Cons
  • Hand sweating is an issue
  • Slag deposits may erode surface

 

3.KIM YUAN Extreme Heat Resistant Gloves

KIM YUAN Extreme Heat Resistant Gloves

 

KIM YUAN is professional grade heat resistant gloves and a great choice for MIG welding. They are made of premium cow leather that ensures heat protection and fireproof environment. Although they don’t offer high temp protection like RAPPICA forge gloves but still get you covered till 662 °F.

The inner cotton lining works efficiently against sweat and keeps your hand dry. These gloves are highly durable and offer amazing cut resistance, fire resistance properties. Kevlar fiber stitching makes sure the glove doesn’t fall apart easily. The cushioned palm makes easy handling of heavy objects while welding.

In my observation, I have found them just a little above average, and just because they offer little insulation in the finger’s area that doesn’t mean they are good as the RAPPICA. So it’s better if you use them for a lower temp range then you can work without any tension.

Pros
  • 14 inches long
  • Cow leather
  • Kevlar Stitching
  • Withstand up to 662 °F
  • Multipurpose use for welding, cooking etc
Cons
  • Shorter length
  • Temp range is lower

 

4.Revco GM1611 Top Grain MIG Welding Gloves 

 

Revco GM1611 Top Grain

If you are looking for something highly specific to MIG Welding that can work non stop then no one can serve you better than the Revco GM1611 Top Grain. They are made of grain cowhide leather with seamless stitching of index finger.

The soft cotton implant inside the glove will make you feel extremely comfortable while working with them. The Kevlar stitching provides great protection against slag and debris. The dexterity is outstanding but flattens if your workpiece is too smaller.

I have noticed, the liner sheds sometimes and fuzzies get on your hands when you take off them creating a little annoying experience. Also, I didn’t like the finger of the glove which is a little bulky and edgy so you might be unable to hold smaller objects. I think you can make a little compromise on that one.

But overall they are fantastic and provide great protection from heat and arc. They have a huge acceptance rate among the welders so you should probably try these ones for sure. you can find them both for smaller and large hands. While working also make sure you have suitable boots.

Pros
  • 16 inches long
  • Cow leather
  • Kevlar Stitching
  • Great Protection against arcs & slag
  • Value for money
Cons
  • Little particles chips of sometimes
  • Fingertips are little stiff

 

5.US Forge 400 Welding Gloves

US Forge 400

The fifth one on my list is US Forge 400 welding gloves, they are extremely budget-friendly and surprisingly useful. They are shorter in length but they can assist you astoundingly in your welding. They are highly comfortable and soft from the inside and give full authority over stick and MIG welding.

Due to their simple design, you will find them handy while working as they are highly flexible and allows you an easy grip over the gun and the workpiece. Their stitching is reliable and you can rely on these pairs.

If you are tired of investing your money then this one is a great choice and considering their price tag they won’t bother you and your job shall also be done. But keep it in mind, for this price you can say they are exceptional but comparative to above these are average.

Pros
  • 14 inches length
  • Leather lining
  • Quality Stitching
  • UV Protection
  • Highly Flexible
  • Cheap
Cons
  • Shorter length
  • Short Life span
  • Temp range is 752°F

 

6.John Tillman and Co 50L Gloves

John Tillman and Co 50L Gloves

 

John Tillman’s welding gloves are as protective as the company’s reputation. They are manufactured with keeping comfortability and protection as a certain focus. They are made up of quality leather and the fleece layer is just amazing it lets you work in cold and hot conditions.

You can rely on these gloves and due to their astonishing ability to sustain at high temperatures, they have made their name on my list. Although they got shrunk sometimes when you work continuously and I have also heard from my colleges that sometimes the cotton comes apart from the linning so this one might cause a little problem for you.

But in terms of dexterity and heat resistance, they work pretty well and your money is paid off. So if you work outdoor more than you can choose these ones they have a specialty for outdoor applications.

Pros
  • Cow leather
  • Kevlar Stitching
  • Great Dexterity
  • Elastic wrist for fitting
  • Bang for Bucks
Cons
  • Inside linning is poor and not long lasting

 

7.Lincoln Electric Traditional MIG/Stick Welding Gloves

Lincoln Electric Traditional MIG/Stick

Lincoln is a huge brand and you might have used their helmets too. The company also did well for hand protections and they are in the premium category. They are slightly overpriced and for that, I have anticipated a greater length above 14 inches but the high-end leather and inner lining do most of the protection.

The inside padding absorbs the sweat but the fingers are a little stiff so once you get used to them you will be good to go. They are highly recommended for professional welders who do stick, MIG, or flux core welding. Its skin can withstand the sparks and high temperature giving you extra efficiency during welding.

Although Kevlar stitching has been done the company didn’t do good for the inside lining. So sometimes the inner lining will come out as you pull off your hands but the exterior stands well and long lasting.

Pros
  • 14 Inches long
  • Split Leather
  • Kevlar Stitching
  • Great for Professionals
Cons
  • Not high temp bearing
  • Slightly Expensive

 

8.WZQH Leather Welding Gloves

WZQH Leather Welding Gloves

Another masterpiece 16 inches long cowhide leather made gloves that can bear a high temp of 932 °F. WZQH is another trustworthy brand for your hand and arms protections. The most attractive thing about these gloves is its stitching you will not find any fray threads.

The 1.2 mm thick leather ensures that nothing penetrates through these gloves while they provide a highly practical grip over the welding. They are one of the best welding gloves you will find in the market. Although it should be mentioned that they are not that durable if you are in direct contact with heat i.e handling hot specimens with hands. You can use tongs for that.

They have higher approval ratings and plus they are cheap. You can rely on them and can do your professional heavy pipeline weldings.

Pros
  • 16 Inches long
  • Bear upto 932 °F
  • Cowhide Split Leather
  • Kevlar Stitching
  • Professionals Choice
  • Cheap
Cons
  • Multilayer limited to hands not extented to arms

 

9.Steiner 21923-L Welding Gloves

Steiner 21923-L

Finally, we are now at the number nine of the list and this one is about Steiner 21923-L welding gloves. They are extra 23 inches long gloves with foam insulation and cowhide leather externally. They are heavy duty and can handle high voltage MIG welding easily.

Although they are extensive in size it somehow affects the dexterity but you can compromise on that owing to the extra protection up to the elbow. One thing that put them last on the list is they have poor stitching so despite they are highly insulating they work only for days once the stitching comes off.

I would recommend them for professionals as they are also a bit heavy so some strong and experienced hands will suit them.

Pros
  • 23 Inches long
  • Reinforced thumb strap
  • Cowhide Split Leather
  • Professionals Grade
Cons
  • Poor Stitching
  • They are heavy
  • Look is awkward

 

The Ultimate Buying Guide & Factors you should Consider

info gloves

After reading the above reviews, it is essential that you must have some know-how about the things you should consider before buying your gloves. So in that scenario, I have covered the following factors that will give you great insight and you can choose the right one for your hand’s protection.

Heat Resistance

During MIG or Stick welding, a lot of heat is produced and if you are a beginner then there is a high probability you will get spatter and injure your hands or burn your arm tissues. So, for top-notch protection and allowing you to work long hours you must choose wisely.

There are tons of gloves in the market but no each of them offers high temperature bearing ability. There is always a special kind of insulating material that makes them thermal resistant. But you should know this is not the only criterion there must be time for how long they can bear the heat in close welding.

Whether these gloves allow you to work long hours? would it be safe if you touch hot metal? How much temperature they can bear while giving you consistency?

The role of Kevlar fiber is pivotal in this field, it is a patented material that can repel a lot of heat and also penetration resistance. Almost all the mentions glove has the kevlar stitching along with the external quality leather layer. So their combination will make the higher safety index which is a blessing.

Dexterity & Flexibility

These are the second most crucial factor and nobody really talks about them. I mean what’s the point of wearing gloves when you become unable to do your job? This one is straight if you are getting a glove then you must confirm that shall it be flexible enough to allow you easy movements of your hands?

If your fingers are entrapped inside a stiff glove that restricts your hand’s sensitive movements then ultimately your weld quality will get affected. So believe me when I say you need a glove that allows great movement of your fingers and the inside insulation should be able to offer protection and dexterity all along.

So for this please make sure what you are going to buy is comfy or not?

Gloves Length & Ambiance

If you want extra protection then it is evident you shall be longing for lengthy gloves. This factor is also significant because you would be able to cover your elbows or arms properly. So while choosing one, keep them your job-oriented and if you are doing flux core welding then you need extra-long gloves that can protect your arms from spattering.

In my list, you will find Steiner L 21923 the longest one and then Caiman’s gloves which are 24 to 21 inches extensive respectively. It’s now up to you whether you like shorter gloves or longer ones.

Durability

It’s another highly essential point, and you should be concerned about this one. There are many gloves that offer great insulation but they have a poor life and their stitching falls apart shortly they are bought. This is highly recommended that they offer seamless stitching and have Kevlar threading which makes them durable for a long time.

The quality gloves have multi insulation implants that increase their life cycle. It’s not easy and fun to continuously invest in the unreliable gloves so that’s why you should really be looking for these properties while buying.

Some Random Queries (FAQs )

How long should welding gloves last?

It depends upon the leather quality, stitching, and how vigorously they are being used so for a rough estimate they can last up to 8-10 weeks. After that, they might develop holes and become useless.

What should you not wear while welding?

Anything that can catch fire, keep your sleeves on as any metal piece can fly on your skin can cause tissue damage. Avoid any alcohol-based product.

What do welding gloves protect against?

Welding gloves are your armor against arcs, debris, hot metal spatters. They protect your skin from getting rashes and tissue damage and also keep UV light out.

Are Kevlar gloves cut resistant?

Kevlar is a next-generation patented material that is cut, and heat resistant, and even it is used in bulletproof jackets. So using them as a stitching thread enhances the protection exponentially.

Conclusion

The whole article is done now and I have presented the best suggestions of welding gloves for you. In this article, I have taken help from some of my colleges and friends and then this insight got into material shape.

This whole list covers unbiased suggestions that can be really productive in protecting your skin. RAPPICA, Caiman, and WZQH gloves can sustain high temperatures and are of professional-grade while the rest are also competent but I like these ones.

You are always welcome to share your suggestions and experiences with me. Your reviews can really help in making this guide more informative so do let me know what you think about it in the comment section.

Hello Everyone, I am James from Kentucky and been into this welding fiasco for 13 years in that time I have worked as a private welder and did most of the auto restoration work. In this recent, COVID-19 outbreak I decided to start a welding blog and share welding tips along with product reviews.

Leave a Comment